August 18, 2019
Model No. H706 – Push Button Hand Shower Head for Kitchen Side Spray or Toilet Bidet Spray. Sanliv hand held shower head in chrome, satin or black is unique for its ON/OFF push button. This great feature allows for easy cleaning as side spray in kitchen sinks, hair washing as well easy cleaning of your shower enclosure or bath. Of course, it is a perfect hand bidet sprayer. Complete shattaf bidet sprayer kit/set is available, it including 120cm flexible shower hose, shower holder/bracket. We also offer Flow Control Valves, to give better water flow control and tighter shutoff, stopping those annoying drips that hand held spray shattafs/bidets tend to have.shattaf valve
Model No. H781 – Handheld Shattaf Bidet Sprayer in Heavy Brass Chrome.
Handheld Muslim Shattaf Bidet Sprayer for personal hygiene and cleanliness. Elegant & practical handheld bidet sprayer, Use in Hotel or Apartment, Easy to fix and remove, Simply hook it to the faucet.
Complete shattaf bidet sprayer kit/set is available, it including
120cm flexible shower hose, shower holder/bracket. We also offer Flow
Control Valves, to give better water flow control and tighter shutoff,
stopping those annoying drips that hand held spray shattafs/bidets tend
Sanliv hand held bidet toilet attachment is a soothing alternative for toilet paper, suitable for low and high water pressure bathrooms. It cleans sensitive genital and rectal areas. Effective for feminine hygiene during menstrual periods. Ideal for people suffering from arthritis, muscular dystrophy, multiple sclerosis. It helps people that have difficulty in bowel movement, physical disability, and those recovering from general surgery. Sanliv Shattaf Bidet Spray attaches to your existing toilet providing the same benefits as the expensive full size bidet faucet found in many large and expensive homes.
Sanliv Two Handle Angle Valve features all in one control for Shattaf
Bidet Sprayer and Toilet water supply by one Angle Shutoff Valve.
Constructed from solid brass for durability and reliability.
One 1/2″ wall mount water inlet connection. Two water outlet controlled by 1/4″ turn handle separately: one 1/4″ turn handle controls one 1/2″ water outlet connector for hand bidet sprayer. Another a quarter-turn valve controls a 1/2″ water outlet connection for toilet seat water supply.
Shutting off the water supply valve beneath a kitchen sink is the prerequisite to several common repair jobs, including faucet repairs and supply line replacement. Kitchen sink supply lines connect to a small, in-line shut-off valve, sometimes called an angle-stop valve, at the rear of the under-sink cabinet. Essentially, these valves function like a faucet handle; they consist of a knob that turns both clockwise and counterclockwise to allow or prevent the flow of water through the valve’s body.1.5m shower hose
Rotate the sink’s faucet handle or knobs clockwise to turn the fixture to the off position. Open the under-sink cabinet’s doors. Turn on a flashlight and shine the flashlight into the under-sink cabinet.
Look beyond the sink’s drain plumbing to the wall at the rear of the cabinet. Scan the wall for a set of metallic handles; sink shut-off valves have oblong or square-shaped handles. Because kitchen sinks have both hot and cold water shut-off valves, look for a set of two valves.
Reach to the rear of the cabinet, grasp one of the valve handles and turn the handle clockwise. Turn the handle clockwise until fully tightened. Grasp the other valve handle and turn it clockwise until fully tightened. If it hurts your palm to grip and turn the handles, wrap a clean rag around the handle while turning. Open the sink’s faucet handles to check that the water supply is shut off.
Every time I travel overseas, from my home base in India, I’m distressed by the thought of having to use only toilet paper to clean up below the belt. It’s gross, uncomfortable, and a lot less effective than using a bidet or a handheld water spray – the latter of which is fairly common in Indian cities, as well as in Japan.portable shattaf bidet
Granted, it isn’t easy to start a bidet spray revolution across the
world, because that would require having new plumbing and fittings
installed. But there’s a glimmer of hope in the form of Sonny, an
electronic portable bidet spray that’s currently crowdfunding on
The $89 device – which appears to be about as long as a 500ml water bottle – charges via USB and houses a cartridge that you can fill with water from a tap. Put the filled cartridge back in, and you can spray to clean your nether regions with a pressurized water flow. The nozzle can be removed and washed, and it retracts into the cylindrical body when it’s not in use.
The company notes that in addition to making your ablutions more
hygienic, it’ll also help you reduce your impact on the environment by
cutting down drastically on your toilet paper usage.
I’m down with all of that. My only concern is whether the Sonny’s compact design will deliver effective cleaning, with the necessary amount of water and pressure.
It baffles me that most countries in the developed world don’t use bidets or sprays. The Atlantic had an interesting piece last year on why the US has been reluctant to adopt them – and the challenge of additional plumbing is understandable. But even with affordable aftermarket options like this $69 model from Tushy and this $25 one from Brondell, it’s odd that the trend hasn’t caught on.
As with all crowdfunded products, you should be wary of the risks associated with backing these campaigns. Sonny says its product has been in the works since 2017, and that it’s set to begin shipping orders this December. For what it’s worth, it’s surpassed its funding goal by nearly four times its target.
From hard hats to steel toe boots, personal protective equipment covers workers from head to toe.personal protective equipment products
Safety+Health, with the help of the International Safety Equipment
Association, recently reached out to PPE manufacturers with three
questions: What PPE trends are happening, what challenges are your
customers reaching out to you with, and what technological innovations
are here or on the horizon?
In the light-duty manufacturing industries, we’ve seen an increased demand for seamless gloves with greater dexterity and increased cut-resistance. In addition, the pressure from purchasers to decrease costs on PPE seems to be higher than ever.”
"One of the most common trends we see at our clients’ locations is
the lack of a formal hazard assessment. A hazard assessment, including a
thorough PPE review, is the critical first step in the selection of the
proper PPE for specific job tasks and the worksite.”
"End-user demand for lighter protective apparel and equipment has been the driving force behind a significant number of innovations in textile, garment and faceshield design. The key is finding products that still provide the appropriate amount of protection but at a fraction of the weight.”
"In the molten metal sector, lighter-weight fabrics are keeping workers cooler and more comfortable while protecting them from molten metal splash. Instead of heavy, aluminized 16-plus-ounce fabric, which has been the industry standard for 30-plus years, the current trend is toward 10- to 12-ounce fabrics. These lighter-weight garments can offer the same protection and are more comfortable to wear.”
"As the dropped objects standard is nearing completion, PPE is being put under the microscope as a potential dropped object hazard. Companies nationwide are taking notice because the proposed standard is in its later stages and nearly prepared for ANSI adoption. While a lot of companies are seeing this upcoming standard as a way of improving tool safety, those who are really on the leading edge of safety are also taking note of PPE items and the effect they have on safety.”
DI washed powder-free, the thickness of these cots is a mere 3 mil, tissue weight sheer film insuring maximum dexterity and relief from finger fatigue. Class 100 processed and packed 10 gross per vacuum sealed ESD-safe polybags. 20 polybags per case.pink antistatic finger cots
Class 100 ESD Finger Cots are cost-effective finger cots that provide excellent protection from skin salts, flakes, oils, and other particulates. Ideal for use in small parts handling where a full glove is not needed. These cots are designed with a proprietary anti-static agent that yields average surface resistance of 5 X 1012 per square surface unit, virtually eliminating electro static discharge.
More sizes, colors, and styles available – call for live help.
See contact information below.
Item: Anti-static finger cot
Units Per Bag: 1440
Thickness: 3 Mil
Package Type: Bag
The benefits of adding fabric to frame your windows are numerous. Besides aesthetic appeal, fabric can increase a room’s energy efficiency by trapping air that might otherwise leak into a room in minute pockets. Acoustic benefits can minimize the echoing caused by hard surfaces such as tiled floors and granite countertops. Valance scarves can be mounted several inches beyond a window casing to visually extend the height and width.
When dressing a kitchen window, it can be a challenge to find the perfect style that will endure daily activities centered at the sink. A valance scarf can provide the perfect solution by framing your view and remaining a safe distance from dishwashing splashes. In task areas, such as kitchens and utility rooms, consider installing a decorative café rode to match cabinets or hardware and draping a machine-washable fabric such as textured cotton or sheer batiste for easy care.
Single 12.375″ Deep Shelf Bracket
Ornate Vine pattern
Distressed Verdigris Color For Rustic Vintage Look
Sturdy Cast Iron Design
Fun DIY Shelf Crafting Project
Combine Shelf Brackets To Make Shelves The Specific Length You Desire
A Single Brace Adds Decorative Appeal As A Mailbox Mount
Features Holes For Easy Mounting
Screws Not Included
This Large Vine Pattern Cast Iron Shelf Bracket can be used to Craft DIY Custom Shelves, hold up mailboxes or in the corner of doorways as decorations. This new brace features a Distressed Verdigris Coloring that adds to it’s rustic vintage appeal.cast iron brackets used
Sleek, metallic and secured on each end with elaborate orbs of glass or finials of wrought iron, today’s curtain rods aren’t just hanging around anymore — they’re adding some serious style to modern window treatments.
Curtain rods have lived a mostly clandestine life. Hidden under yards of muslin or yellowed antique lace, they rarely saw the light of day.resin curtain rod finials
But all that has changed.
Sleek, metallic and secured on each end with elaborate orbs of glass or finials of wrought iron, today’s curtain rods aren’t just hanging around anymore — they’re adding some serious style to modern window treatments.
"Generally, drapery rods are not the main event, but have a supporting role,” said La Grange resident Mary Lou Kalmus, owner/interior designer of Designing Edge in Clarendon Hills. "You want to have the right scale and look. Sometimes you want them hidden, like in a rod pocket, and others may want to make a statement. You need to coordinate the style, level of sophistication and function. It is like an accessory.”
Bolingbrook resident Monique Fisher of Interiors by Monique said she bases her purchases on what type of drapery rod is needed to complete the client’s desired look.
While the rod may not be the most important element in an interior design or redesign plan, Fisher said, "People really have an opinion on what they want. They consider it important.”
And options abound for those looking to update their window treatments. Taste and design dictate whether rods hold up stationary drapery panels, support drapes with tabs that fit over the rod, or bear rings attached to fabric, said Wording resident Melissa Secor, senior designer at Dream Interiors in Downers Grove.And with the right finials, Secor said just the right tone can be set for a window treatment. Look for finials in many styles and materials, such as crystal, iron or wood.
PPG (NYSE PG) today announced the creation of an automotive original equipment manufacturer (OEM) services organization that will aggressively support the success of vehicle manufacturers worldwide through an enhanced and expanded portfolio of technologies, technical services and related capabilities. The new organization will serve as a single technical service touchpoint spanning PPG’s complete product offering for automotive and commercial vehicle OEMs.OEM service
The automotive OEM services organization will combine the company’s multiple customer-facing service teams, including Total Service Solutions and OPTIMA SOLUTIONS ® representatives . It will deliver a comprehensive and consistent value package designed to help OEMs reduce costs, increase productivity and meet ever-rising quality and performance targets.
The new organization also will enable PPG to accelerate the development and introduction of new coatings solutions and expand customer access to innovative technologies used in other markets, including aerospace, industrial and consumer electronics.
"This new structure will transform how vehicle OEMs can benefit from our technology and service leadership,” said Dennis Taljan, PPG general manager, automotive OEM services. "We will be best-in-class not only in terms of the breadth and quality of our coatings products, but also in supporting the daily success of our customers in every production facility.”
The new organization will further support customers by ensuring consistent application of PPG’s proprietary SECURE LAUNCH® protocols, which are disciplined processes through which new PPG products and related technologies are launched within customer facilities.
" Secure Launch protocols eliminate the countless variables that can negatively affect plant productivity and product quality,” Taljan said. "OEM customers can trust that each new coating technology and product from PPG will deliver tangible value from day one.”
Within a printed circuit board electronics assembly / production or
manufacturing process there are a number of individual stages. However
it is necessary for them all to work together to form an integrated
overall process. Each stage of assembly and production must be
compatible with the next, and there must be feedback from the output to
the input to ensure that the highest quality is maintained. In this way
any problems are detected quickly and the process can be adjusted
accordingly.smt pcb assembly process
The various stages in the PCB assembly process including adding solder paste to the board, pick and place of the components, soldering, inspection and test. All these processes are required, and need to be monitored to ensure that product of the highest quality is produced. The PCB assembly process described below assumes that surface mount components are being used as virtually all PCB assembly these days uses surface mount technology.
Solder paste: Prior to the addition of the components to a board, solder paste needs to be added to those areas of the board where solder is required. Typically these areas are the component pads. This is achieved using a solder screen.
The solder paste is a paste of small grains of solder mixed with flux. This can be deposited into place in a process that is very similar to some printing processes.
Using the solder screen, placed directly onto the board and registered in the correct position , a runner is moved across the screen squeezing a small mount of solder paste through the holes in the screen and onto the board. As the solder screen has been generated from the printed circuit board files, it has holes on the positions of the solder pads, and in this way solder is deposited only on the solder pads.
The amount of solder that is deposited must be controlled to ensure the resulting joints have the right amount of solder.
Pick and place: During this part of the assembly process, the board with the added solder paste is then passed into the pick and place process. Here a machine loaded with reels of components picks the components from the reels or other dispensers and places them onto the correct position on the board.
The components placed onto the board are held in place by the tension of the solder paste. This is sufficient to keep them in place provided that the board is not jolted.
In some assembly processes, the pick and place machines add small dots of glue to secure the components to the board. However this is normally done only if the board is to be wave soldered. The disadvantage of the process is that any repair is made far more difficult by the presence of the glue, although some glues are designed to degrade during the soldering process.
Smartphones and computers are perfect applications for multilayer PCBs with their need for compactness and light weight, yet sophisticated functionality.
From a technical standpoint, there are numerous advantages to the use of multilayer designs, over and above saving space and weight:
By incorporating multiple layers in a single PCB, boards can increase functionality.
Manufacturing processes for multilayer boards result in high-quality, reliable end products.
Multilayer boards by their innate electrical properties provide high capacity and high speed in a smaller footprint.
Higher density of assembly
Connectors required for multiple separate PCBs are reduced or eliminated, simplifying construction and further reducing weight.
Multilayer PCBs can be manufactured in both rigid and flexible construction. Be advised though, that the more layers incorporated in a flex PCB, the less flexible it becomes.
Every technology has pros and cons, and multilayer PCBs are not immune from negative attributes:
Cost – one of the primary negatives in designing and implementing multilayer PCBs is the cost. As specialized processes are involved in the manufacturing of these boards, there is a considerable investment required for fabricators to offer these services. This makes the cost of multilayer boards higher than a traditional single or double-sided board.
Service availability – not all PCB manufacturers have made the commitment to manufacturing these complex boards, limiting the resource options available to PCB designers.
Compactness of multilayer boards generates design concerns for such issues as crosstalk and impedance problems.
With increased functionality comes the need for more extensive testing of a single PCB. Manufacturing cycles may also be longer, due to the very complexity of the manufacturing process.
Repairing a multilayer PCB can be extremely difficult, and may even be unfeasible or impossible. This makes failure of a multilayer board costly, since it may need to be totally replaced.
Interconnection between layers is critical for board function, making design and fabrication of microvias and overall density critical.
Electronic door locks are a way to replace keys or to add additional automation features, like remote locking or unlocking. Although most commonly found on cars, many cutting-edge security providers are offering electronic door locks for homes and businesses.door lock system using bluetooth
In any type of door lock, a latch or bolt is made to cross the opening between the side of the door and the doorframe, preventing access. This can be a "spring bolt,” which is held in place by springs and allows the door to close (but not reopen) when locked, or the more secure "dead bolt,” which stays in place until manually unlocked. In both cases, locking and unlocking is achieved by rotating the visible element (a knob or a key in a lock cylinder) to move the bolt or latch.
Traditional key locks use some variation of the "pin and tumbler” method, in which the lock cylinder is held in place with a line of small metal pins, each of which consists of an upper and lower half. When a key is inserted and turned, the uneven "serrated” edge ensures that each pin is moved a certain distance. The cylinder may be turned only when each pin is moved just enough to create a straight separation between the upper and lower halves of all pins.
Electronic door locks also involve parts called "actuators,” which connect the bolt or the cylinder to a small motor completely buried within the door or frame itself. The motor is controlled by an electrical impulse, which may be triggered in a number of ways: by an electronic card reader, by a keypad or by a wireless remote control sensor. Either way, the electronic door lock is configured to start the motor-driven actuator only once it has received the correct electronic input.
Each method of locking has pros and cons. Physical keys, such as
metal keys, key cards or handheld remotes, can be lost or damaged, while
numerical key codes can be forgotten (or learned and memorized by the
wrong person). Key codes can be quickly and easily changed by the user
when necessary, while changing physical locks and keys is much more
involved, requiring specialized hardware and expertise. Power failures
are problematic for purely electronic door locks, causing them to remain
locked or unlocked until the electricity has been restored.
On most electronic door locks, you’ll find some combination of physical and electronic locking control on the same door. For example, you may have a physical key for setup and emergency backup, but use the remote or keypad to lock and unlock the door on a day-to-day basis. This provides an extra layer of convenience and safety for the user, but may also provide additional functionality as well.
Of all the smart home gadgets out there, smart locks are some of the best problem-solvers when it comes to everyday annoyances. Forget your key? No problem. Need to unlock the door to let in a friend or service provider? Easy-peasy. Forgot to lock the door before heading into bed? Don’t worry. With a smart lock at your door, you can manage all of that with an easy voice command or the tap of a button, offering you security, convenience, automation and peace of mind.bluetooth based door lock system
Picking the best smart lock for your home depends on a few things. For some, scheduling and user code limits will be important. For others, having a door lock that can be retrofit and not replace the deadbolt on the door is a must-have. We’ve tested the best smart locks on the market today and these are our favorites.
The $279 August Smart Lock Pro + Connect bundle includes a retrofit August Smart Lock Pro, a Connect Wi-Fi module and a DoorSense open/close sensor.
This August smart lock supports the Z-Wave wireless protocol (smart hub not included) and works with Apple HomeKit. With the Wi-Fi module set up, you’ll get Amazon Alexa and Google Assistant compatibility, as well as remote access to your lock for when you’re not home.
The Smart Lock Pro is a capable, easy-to-install smart lock and the winner of our CNET Editors’ Choice Award. August’s $219 third-generation Smart Lock + Connect bundle comes with a DoorSense open/close sensor and Connect Wi-Fi module. The low profile, retrofit design means you won’t need to replace your deadbolt, making it great for renters.
The August Smart Lock with the Connect setup works with Google Assistant and Amazon Alexa and is controllable remotely through the August mobile app. You won’t get Apple HomeKit compatibility or Z-Wave smarts to connect to a smart hub. Still, this August Smart Lock is a moderately priced, capable smart door lock.
August 17, 2019
A man with a loaded gun in a diaper bag shot himself and his daughter
while changing his daughter’s diaper in a vehicle in Vestavia Hills,
Alabama, police said.
CNN affiliates report the incident happened Saturday afternoon, either at or near a Chuck E. Cheese’s pizza parlor in the Birmingham suburb.
The father, who was not identified, was in the back seat of a vehicle changing the girl’s diaper, and the gun went off as he picked up or reached inside the bag, which was sitting on the floorboard, Vestavia Hills Police Department spokesman Capt. Johnny Evans said.adventuridge picnic cooler bag
After the gun went off, the bullet traveled through the adult’s leg
and then the child’s leg before lodging in the man’s chest, Evans said.
The child is going to be OK. Her father is in serious condition, he said.
CNN affiliate WBMA reported the shooting happened near Chuck E. Cheese’s, while another affiliate, WBRC, said it occurred in the parking lot of the child-themed pizza and gaming center.
John and Ashley Gerrard of Bessemer were at Chuck E. Cheese’s with their 2-year-old when the shooting happened, leaving them worried for their daughter’s safety, WBRC reported.
"You don’t expect anyone would bring a gun around where kids would be. It just doesn’t make any sense,” John Gerrard told the station.
A staff member at Little Sprouts daycare found the Smith and Wesson and followed safety procedures, bringing the gun to the office of the executive director without taking it from the bag, according to a statement from the daycare.
Police arrived within minutes, and the gun never discharged. No one was hurt, and all families with children at the daycare were notified.
The gun belonged to the child’s father, who has his license to carry, according to Peabody police. The gun was fully loaded, and the safety was on. The Department of Children and Families was also notified, according to the statement.
"I am proud of our team’s prompt and responsive actions to protect the children in our school and we are grateful that all are safe,” Little Sprouts CEO Sarah Schroeder said. "We continue to feel fully supported by local authorities and are deeply appreciative of their partnership in prioritizing our school’s security.”
Sumitomo SHI FW (SFW) announces today that it has been awarded a
contract by Cheng Loong Corporation, CLC for a CFB steam generator for
their Chupei Mill in Taiwan. Commercial operation of the new boiler is
scheduled for July 2021.CFB Boiler
SFW will design and supply the 19 MWe CFB steam generator and auxiliary equipment and also provide technical advisory services for erection and commissioning. The CFB will be designed to burn paper mill rejects as primary fuel and paper mill sludges and coal as secondary fuels. This is the second CFB that SFW has supplied to CLC. In 2012, Sumitomo Heavy Industries (SHI), as a licensee of SFW, delivered a 35 MWe CFB boiler firing coal and tire derived fuel for CLC’s Houli Mill.
"We are pleased to again be selected by CLC to deliver our advanced CFB steam generator for their mill which will allow CLC to meet stricter environmental emission standards while burning waste fuels. The solution is a win-win for both CLC and the environment.”
Sumitomo SHI FW is a world leader in combustion and steam generation technology. The company has sold over 500 CFB boilers around the world, bringing high-value technology solutions to utilities, independent power generators and industrial clients. Our leadership position in CFB boiler combustion has resulted from our commitment to deliver superior designs providing high efficiency, fuel flexibility and low emissions. Our power solutions expand beyond fluidized bed technologies, covering a full range of environmental products, waste heat boilers and a spectrum of aftermarket services.
FROM THE FEBRUARY ISSUE: Plants built in the ethanol construction
peak are approaching 10 to 15 years of operation, and many are exploring
whether to repair or replace. HRST Inc. has some advice.
The thermal oxidizer (TO) heat recovery steam generator (HRSG) is a staple system for many ethanol plants built during the mid-2000s construction boom. As plants near the 10- to 15-year operating mark, performance and efficiency might be the deciding factor between repairing or replacing equipment. Routinely inspecting and quantifying performance can improve the reliability and operation of an existing HRSG, extending the life of the system. hrsg boiler design
Assessing the condition of the HRSG is a critical first step in determining its overall health. Having a comprehensive water- and gas-side inspection helps establish a baseline condition of the HRSG that can be compared to future inspection findings. Comparing can be qualitative and simple, "The tubes appear more oxidized than last year;” or more quantitative and complex, "The material thinning in this location is 1/16 of an inch and last year it was at 1/32 of an inch.”
A variety of locations should be observed on the water and gas side. Knowing at-risk areas can help determine where to look and when. Inspection areas for a typical TO/HRSG configuration include the HRSG inlet from the TO, the evaporator section of the HRSG, steam drum connections and internals and the packaged economizer. Important items and components to observe in these locations are: liner and baffle condition; tube-to-header connections/welds; external tube fouling, corrosion and oxidation; internal tube deposits or material loss; steam separation equipment and configuration; and overall as-built design (pipe size, configuration, material).
Temperature is a key factor in how efficiently the HRSG components operate. In HRSGs that are fired harder (e.g., a TO burner that is pushed to its maximum firing rating), metal components often exceed the recommended design limit temperature. Liners, baffles and tubes are all susceptible to overheat.
Overheated liners might oxidize, warp or break off studs when thermal expansion causes them to distort. As the liner sheets distort and expose insulation, the high temperature turbulent gas flow can wear away the insulation and cause hot spots on the HRSG.
Baffles become brittle and degrade over time as they overheat, eventually allowing the flue gas flow to bypass the tube bank, resulting in lower HRSG performance. In the case of bypass along the sidewalls of the evaporator, the increased flow along the panel end tubes will disproportionately cause tubes to overperform and generate more steam than the tubes toward the center of the panels.The evaporator tubes are less susceptible to overheat damage, but the fin material will begin to oxidize and break off until the fin tip temperature is at the material threshold. While this is not a reliability concern, it can lower the performance of the evaporator. Tube leaks or failures often occur at the tube-to-header connection. This can be caused by high stress at the weld joint, often related to the geometry of the tube-to-header connection, but sometimes because of flow conditions on the water or gas side. Performing a gas-side inspection at the beginning of a shutdown can allow more time for tube leaks to be identified and repaired. Depending on the location within the bundle, this could be a time-consuming process. When tube failures occur, a root cause failure analysis (RCFA) should be performed to determine the failure mechanism, in addition to implementing a preventative operation or maintenance procedure to mitigate future failures. Don’t just weld the crack; involve someone who can review the location, failure and maintenance history.
Inflatable Air Pillow Systems: Fill-Air Cyclone, Fill-Air Rocket, Wonderfil Wrap, Rapid Fill
Cushioning Systems: NewAir I.B., PackTiger, SpeedyPacker, Instapacker Tabletop, Instapack iMold
Paper Cushioning Systems: PackTiger and PackTiger Hybrid
Sheeting Systems: Accu-Cut and Instasheeter
Paper Void Fill Systems: FasFil® EZ, FasFil®, PackTiger, PackTiger® Hybrid
Void Reduction Systems: I-Pack and Ultipack®
Automated Mailer System: Priority Pak
The main goal of packaging operations is to get products packed, shipped and delivered in made-ready condition, in a cost-effective and timely manner. Meeting these objectives creates a more productive packaging environment, and more importantly—increases customer satisfaction.air bubble machine
AP7000 Inflatable Air Pillow System, This easy-to-use table top system allows you to quickly produce convenient, cost-effective void fill on-demand. Air Pillows are lightweight, perforated for easy separation.Air Cushion Machine
They are made of nonabrasive poly which will not scratch the surface of your product.
They are reusable and recyclable, with disposal requiring a low volume in landfills when deflated.
Produces air pillows at 60 feet per minute.
Produces 90 – 8”x8” air pillows per minute.
8”x5” , 8”x8” and 8”x12” stocked air pillow sizes available.
2900’ and 4000’ length rolls available
Easy to operate.
No messy clean up.
Customized printed air pillow with QR code available with low minimum requirement.
10 Rolls Monthly Usage Required for AP-7000 Air Pillow Machine.
1.2 & 1.5 mil IPG Air Pillows Lightweight, perforated for easy separation and made of non-abrasive poly which will not scratch the surface of your product. Reusable and recyclable, with disposal requiring a low volume in landfills when deflated.
2900′ length rolls engineered to save you money by minimizing roll changeovers and limiting down time, increasing productivity, and using fewer rolls per order – reducing valuable inventory space!
We design, produce machine and consumable materials, also provide packaging solution.Air cushion packaging
The earliest company engaged on air cushion packaging in China, have professional RD team and patent right.
Have distributors in many countries with perfect agency sale network.
Developed air cushion brand MINI AIR
2015 Company goes public
2013 The most portable air cushion machine EASi launched.
2011 Set up CUSHIONPAK international service center.
2010 MINI AIR CLASi air cushion machine launched.
2009 Bring in advanced technology, developing air cushion machine
2007 Focus on air cushion system, design and supply air cushion packaging solution.
2006 Company established
32 queries taking 0.3472 seconds, 109 records returned.
Powered by Minx 1.1.6c-pink.